DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
35
The Switch incorporates a flexible SNMP management for the switching environment. SNMP
management can be customized to suit the needs of the networks and the preferences of the network
administrator. Use the SNMP V3 menus to select the SNMP version used for specific tasks.
The Switch supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The
administrator can specify the SNMP version used to monitor and control the Switch. The three versions of
SNMP vary in the level of security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the Web manager.
Workstations on the network that are allowed SNMP privileged access to the Switch can be restricted
with the Management Station IP Address menu.
SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
To view the following window, click
Management > SNMP > SNMP Global Settings
, as shown below:
The fields that can be configured for
SNMP Global Settings
are described below:
Parameter
Description
SNMP Global State
Select this option to enable or disable the SNMP feature.
The fields that can be configured for Trap Settings are described below:
Parameter
Description
Trap Global State
Select this option to enable or disable the sending of all or specific
SNMP notifications.
SNMP Authentication Trap
Tick this option to control the sending of SNMP authentication
failure notifications. An authenticationFailuretrap is generated
when the device receives an SNMP message that is not properly
authenticated. The authentication method depends on the version
of SNMP being used. For SNMPv1 or SNMPv2c, authentication
failure occurs if packets are formed with an incorrect community
string
Port Link Up
Tick this option to control the sending of port link up notifications. A
linkup trap is generated when the device recognizes that one of
the communication links has come up.
Port Link Down
Tick this option to control the sending of port link down
notifications. A linkDown trap is generated when the device
recognizes a failure in one of the communication links.
Figure 5-3 SNMP Global Settings window
