DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
5
Smart Wizard
After a successfully connecting to the Web User Interface for the first time, the Smart Wizard embedded
Web utility will be launched. This wizard will guide the user through basic configuration steps that is
essential for first time connection to the Switch.
Step 1 - Web Mode
The Switch supports two Web Modes,
Standard Mode
and
Surveillance Mode
. The Standard Mode is
used to configure, manage, and monitor most of the software features on the Switch. The Surveillance
Mode is an additional web mode specifically designed to assist the user with surveillance features
supported by the Switch.
NOTE:
The
Web Mode
can only be changed when one user session is connected to the
Web UI of the Switch.
The
fields that can be configured are described below:
Parameter
Description
Standard Mode
Select this option to access the Standard Mode after the Smart
Wizard was completed.
Surveillance Mode
Select this option to access the Surveillance Mode after the Smart
Wizard was completed.
Tick the
Ignore the wizard next time
option to skip the Smart Wizard on the next login.
Click the
Exit
button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.
Click the
Next
button to accept the changes made and continue to the next step.
Figure 2-3 Web Mode