D-Link DIR-806A User Manual Download Page 93

Page: 93 / 180

DIR-806A

Wireless AC750 Dual Band Router

User Manual

Figure 80. Configuring the local interface. The

IPv6

tab. The

DHCP

section.

Parameter

Description

DHCP

Mode

Select a mode of IPv6 address assignment from the drop-down list.

Server

: the router assigns IPv6 addresses to clients automatically in

accordance with the specified parameters. When this value is
selected, the

Autoconfiguration mode

drop-down list and the

Lease time

field are displayed on the tab.

Disable

: clients' IPv6 addresses are assigned manually.

Autoconfiguration

mode

Select a mode from the drop-down list.

Stateless

: clients themselves configure IPv6 addresses using the

prefix.

Stateful

: the built-in DHCPv6 server of the router allocates

addresses from the range specified in the

Start IP

and

End IP

fields.

Start IP

The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.

End IP

The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.

Lease Time

The lifetime of IPv6 addresses provided to clients. The field is
available for editing, if the

Static

value is selected from the

Addressing mode

list in the

section.

When all needed settings are configured, click the

APPLY

button.

Page

of 180

Summary of Contents for DIR-806A





















































































































































































Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands

D-Link DIR-806A, User Manual

Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands