DIR-806A
Wireless AC750 Dual Band Router
User Manual
Connections Setup
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Connections Setup
/ WAN
page, you can create and edit connections used by the router.
By default, a
Dynamic IPv4
connection is configured in the system. It is assigned to the WAN
port of the router. You can edit this connection or delete it.
Figure 54. The
Connections Setup / WAN
page.
To create a new connection, click the
Add
button in the
Connections List
section. On the opened
page, specify relevant parameters.
To edit an existing connection, in the
Connections List
section, left-click the relevant line in the
table. On the opened page, change the parameters and click the
APPLY
button.
To disconnect a connection and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
Reconnect
button.
On the
Basic
tab, mandatory settings of a WAN connection are displayed. To view all available
settings of the needed WAN connection, go to the
All Settings
tab.
To remove a connection, in the
Connections List
section, select the checkbox located to the left
of the relevant line in the table and click the
Delete
button. Also you can remove a connection on
the editing page.
To allow multicast traffic (e.g. streaming video) for a connection, in the
IGMP
section, select the
choice of the radio button which corresponds to this connection (only for connections of the
Dynamic IPv4 or Static IPv4 type).
To forbid multicast traffic for all WAN connections, select the
Disable
choice of the radio button.
To use one of existing WAN connections as the default IPv4 or IPv6 connection, in the
Default
Gateway
section, select the choice of the radio button which corresponds to this connection.
Page
64
of 180
