D-Link DIR-806A User Manual Download Page 142

Page: 142 / 180

DIR-806A

Wireless AC750 Dual Band Router

User Manual

The following elements are available on the page:

Parameter

Description

IGMP

Select a version of IGMP from the drop-down list. Such a setting
allows to enable multicasting from the WAN connection selected in
the

IGMP

section on the

Connections Setup / WAN

page.

SIP

Move the switch to the right to enable SIP. Such a setting allows
using the SIP ALG function. This function allows VoIP traffic to
pass through the NAT-enabled router.

RTSP

Move the switch to the right to enable RTSP. Such a setting allows
managing media stream: fast forward streaming audio/video, pause
and start it.

PPPoE pass through

Move the switch to the right

to enable the PPPoE pass through

function.

IPsec pass through

Move the switch to the right

to enable the IPSec pass through

function.

L2TP pass through

Move the switch to the right

to enable the L2TP pass through

function.

PPTP pass through

Move the switch to the right

to enable the PPTP pass through

function.

After specifying the needed parameters, click the

APPLY

button.

4 On the

Connections Setup / WAN

page, create a WAN connection, move the

SIP

switch to the right on the

Advanced / IGMP/ALG/Passthrough

page, connect the phone cable between a LAN port of the router and the

IP phone. Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically (as DHCP
client).

Page

142

of 180

Summary of Contents for DIR-806A





















































































































































































Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands

D-Link DIR-806A, User Manual

Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands