D-Link DIR-806A User Manual Download Page 89

Page: 89 / 180

DIR-806A

Wireless AC750 Dual Band Router

User Manual

LAN

To configure the router's local interface, go to the

Connections Setup / LAN

page.

IPv4

Go to the

IPv4

tab to change IPv4 address, configure the built-in DHCP server, or specify MAC

address and IP address pairs.

Figure 76. Configuring the local interface. The

IPv4

tab. The

section.

Parameter

Description

IP address

The IP address of the router in the local subnet. By default, the
following value is specified:

192.168.0.1

Subnet mask

The mask of the local subnet. By default, the following value is
specified:

255.255.255.0

Device domain name

The name of the device attached to its IP address in the local subnet.

Figure 77. Configuring the local interface. The

IPv4

tab. The

DHCP

section.

Page

of 180

Summary of Contents for DIR-806A





















































































































































































Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands

D-Link DIR-806A, User Manual

Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands