D-Link DIR-806A User Manual Download Page 114

Page: 114 / 180

DIR-806A

Wireless AC750 Dual Band Router

User Manual

Additional

On page of the

Wi-Fi / Additional

section, you can define additional parameters for the WLAN of

the router. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.

Changing parameters presented on this page may negatively affect your WLAN!

Figure 92. Additional settings of the WLAN.

The following fields are available on the page:

Parameter

Description

Bandwidth

The channel bandwidth for 802.11n standard in the 2.4GHz band
(the

2.4GHz

tab).

20MHz

: 802.11n clients operate at 20MHz channels.

40MHz

: 802.11n clients operate at 40MHz channels.

20/40MHz -

: 802.11n clients operate at 20MHz or 40MHz channels

(the channel is combined with the previous adjacent channel).

20/40MHz +

: 802.11n clients operate at 20MHz or 40MHz channels

(the channel is combined with the next adjacent channel).
The channel bandwidth for 802.11n and 802.11ac standards in 5GHz
band (the

5GHz

tab).

20MHz

: 802.11n and 802.11ac clients operate at 20MHz channels.

40MHz

: 802.11n and 802.11ac clients operate at 40MHz channels.

80MHz

: 802.11ac clients operate at 80MHz channels.

TX power

The transmit power (in percentage terms) of the router.

Page

114

of 180

Summary of Contents for DIR-806A





















































































































































































Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands

D-Link DIR-806A, User Manual

Search results

Summary of Contents for DIR-806A

Reviews:

Related manuals for DIR-806A

Brands by name

Popular brands