D-Link DIR-660 User Manual Download | Manualshive

Page: 79 / 98

background image

D-Link DIR-660 User Manual

Section 6 - Troubleshooting

Troubleshooting

This chapter provides solutions to problems that can occur during the installation and operation of the DIR-660. Read
the following descriptions if you are having problems. (The examples below are illustrated in Windows

®

XP. If you have

a different operating system, the screenshots on your computer will look similar to the following examples.)

1. Why can’t I access the web-based configuration utility?

When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on
the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
Your computer must be on the same IP subnet to connect to the web-based utility.

• Make sure you have an updated Java-enabled web browser. We recommend the following:

• Internet Explorer 6.0 or higher
• Netscape 8 or higher
• Mozilla 1.7.12 (5.0) or higher
• Opera 8.5 or higher
• Safari 1.2 or higher (with Java 1.3.1 or higher)
• Camino 0.8.4 or higher
• Firefox 1.5 or higher

• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using

a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may
not be on.

• Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice,

Sygate, Norton Personal Firewall, and Windows

®

XP firewall may block access to the configuration pages. Check the

help files included with your firewall software for more information on disabling or configuring it.

«
...
77
78
79
80
81
...
»

Summary of Contents for DIR-660



































































































Reviews:

No comments

Related manuals for DIR-660

Brand: Zonet Pages: 2

Brand: Zonet Pages: 3

Brand: Waxess Pages: 27

PTP 550E Series

Brand: Cambium Networks Pages: 250

Brand: Lancom Pages: 9

Brand: nedis Pages: 3

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 26

Brand: Samsung Pages: 28

Brand: Samsung Pages: 29

SWL-4000AP Series

Brand: Samsung Pages: 89

Instant Wireless WAP54G

Brand: Linksys Pages: 67

Brand: Blink Pages: 3

Brand: San Telequip Pages: 13

Brand: Redpine Signals Pages: 62

Brand: P2 Wireless Technologies Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands