DI-304/DI-304M ISDN Remote Router
Internet Access Setup
For most users, Internet access is the primary application. The following sections
will explain more details of ISDN dial-up access and broadband access setup. When
you click
Internet Access Setup
within the
Quick Setup
group, the following setup
page will be shown.
Five methods are available for Internet Access:
♦
Dialing to Single ISP –
If you want to access the Internet via a single ISP,
click here.
♦
Dialing to Dual ISP –
If you have more than one ISP, click here to set up
two ISP dialup profiles. You will be able to dial to both ISPs at the same
time. This is mainly for those ISPs who do not support Multiple link PPP
(ML-PPP). In such cases dialing to two ISPs can increase the bandwidth
utilization of the ISDN line to 128kbps data speed.
♦
PPPoE –
This is for most DSL modem users. All local users can share
one PPPoE connection to access the Internet.
♦
PPTP –
Some DSL service providers supply a special DSL modem (e.g.
Alcatel's DSL modem). This kind of modem only supports the PPTP
tunnel method to access the Internet. In these cases, you create a PPTP
tunnel that carries a PPP session and terminates on the DSL modem. Once
the tunnel has been established, this kind of DSL modem will forward the
PPP session to the ISP. As long as the PPP session is connected, all the
local users will be able to share this PPP session to access to the Internet.
♦
Static IP –
If you have obtained public IP address from DSL, Leased-
Line or Cable (static IP only) service provider, select Static IP to setup
your Internet Access mode.
ISDN Dial-up Internet Access
Dialing to a Single ISP
29
Summary of Contents for DI-304
Page 56: ...DI 304 DI 304M ISDN Remote Router Branch Office 48 ...
Page 57: ...DI 304 DI 304M ISDN Remote Router 49 ...
Page 90: ...DI 304 DI 304M ISDN Remote Router 82 ...
Page 105: ......
