D-Link DI-304 User Manual Download Page 33

Page: 33 / 105

DI-304/DI-304M ISDN Remote Router

This allows you to grant or limit access rights to manage the router. Also,
you may set HTTP or Telnet ports to specific port numbers of your choice.

4. Diagnostic Tools.

Diagnostic tools offers useful tools to diagnose the router or your network,
e.g. view ARP table, routing table, NAT port map, DHCP server status, last
triggered packet, etc.

5. Reboot System

You can restart the router with the default configuration or with the current
running configuration.

6. Firmware Upgrade (TFTP Server)

Enables the TFTP server for firmware upgrades.

Note

You should now have some basic concepts on how to setup and configure the

router. The following chapters will explain each setup menu and related
settings in more detail.

Summary of Contents for DI-304










































































































Search results

Summary of Contents for DI-304

Reviews:

Related manuals for DI-304

Brands by name

Popular brands

D-Link DI-304, User Manual

Search results

Summary of Contents for DI-304

Reviews:

Related manuals for DI-304

Brands by name

Popular brands