D-Link DI-304 User Manual Download Page 2 | Manualshive

Page: 2 / 105

background image

Copyright Statement

Copyright ©2002 D-Link Corporation

No part of this publication may be reproduced in any form or by any means or used
to make any derivative such as translation, transformation, or adaptation without
permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the
United States Copyright Act of 1976.

Trademarks

D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc.

All other trademarks belong to their respective owners.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with emission limits.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference in which case
the user may be required to take adequate measures.

«
1
2
3
4
...
»

Summary of Contents for DI-304










































































































Reviews:

No comments

Related manuals for DI-304

Brand: IBM Pages: 72

TokenLink Velocity 3C319

Brand: 3Com Pages: 2

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: Ubiquiti Pages: 40

Brand: ZyXEL Communications Pages: 299

SLK-R602 Series

Brand: Seriallink Pages: 29

Brand: Moxa Technologies Pages: 51

Brand: Gemtek Systems Pages: 51

Brand: RubyTech Pages: 25

BROADCAST POLLING FRAD BPF-14 BU

Brand: DCB Pages: 28

24-Port 1000BASE-T

Brand: Comet Labs Pages: 44

Brand: Allied Telesis Pages: 2

Brand: Kentrox Pages: 246

Brand: Xantech Pages: 6

Brand: Perle Pages: 4

Brand: Acces Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands