DI-304/DI-304M ISDN Remote Router
Virtual TA Application
This chapter covers Virtual TA concepts and explains how to setup a Virtual TA.
Quick Setup
>> Virtual TA (Remote CAPI) Setup
Virtual TA Concepts
The term
Virtual TA
means the local Ethernet-connected hosts or PCs use popular
CAPI-based software such as RVS-COM or BVRP etc. to access the router as a
local ISDN TA for FAX sending or receiving via the ISDN line. Basically, it is a
client/server network model. The Virtual TA server built into the router handles the
connection establishment and release. The Virtual TA client, installed in the
Ethernet-connected host, creates a CAPI-based driver to relay all CAPI messages
between applications and the router's CAPI module.
Note
:
1. The Virtual TA client is only supported on Microsoft Windows 95 OSR2.1/98/98
SE/Me/2000 platforms.
2. The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in
FAX engine.
3. One ISDN BRI interface only has two B channels. The maximum number of
active clients is also 2.
4. Before you set up the Virtual TA, you must set the correct country code. Click
ISDN Setup
in the
Basic Setup
group.
As the following application chart shows, the Virtual TA client can make an
outgoing call or accept an incoming call to/from a peer FAX machine or ISDN TA
etc.
66
Summary of Contents for DI-304
Page 56: ...DI 304 DI 304M ISDN Remote Router Branch Office 48 ...
Page 57: ...DI 304 DI 304M ISDN Remote Router 49 ...
Page 90: ...DI 304 DI 304M ISDN Remote Router 82 ...
Page 105: ......
