DI-304/DI-304M ISDN Remote Router
Appendix A – Troubleshooting and FAQs
The following section explains how to use Telnet terminal commands to diagnose
your network problems via the built-in debug tool. Our examples use Windows
Telnet client software. If you are a Mac user, you should install third-party Telnet
client software on your computer. By default, the Linux has a built-in Telnet client.
Using the Telnet Terminal Commands
Click
Start
→
Run
and type
Telnet 192.168.0.1
in the
Open
box as below. Note
that the IP address in the example is the default address of the Router. If you have
changed the default, enter the current IP address of the router.
Click
OK
. The Telnet terminal will open. If an administrator password has not been
assigned, follow the on-screen instructions to assign one.
After assigning a password, type a question mark (
?)
. You will see all the possible
Telnet commands.
83
Summary of Contents for DI-304
Page 56: ...DI 304 DI 304M ISDN Remote Router Branch Office 48 ...
Page 57: ...DI 304 DI 304M ISDN Remote Router 49 ...
Page 90: ...DI 304 DI 304M ISDN Remote Router 82 ...
Page 105: ......
