manualshive.com logo in svg

D-Link DGS-3200-16 - Switch - Stackable, User Manual

The D-Link DGS-3200-16 Stackable Switch is a reliable networking solution designed to streamline your connectivity needs. With this product, you can easily manage and expand your network, ensuring hassle-free operations. Enhance your user experience by downloading the free user manual from manualshive.com, providing step-by-step instructions and valuable insights for optimal usage.

Share
Download
background image

xStack

® 

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

 

58 

     

VLAN Name 

VID 

Switch Ports 

System (default) 

1 

5, 6, 7 

Engineering 2 

9, 

10 

Sales 

5 

1, 2, 3, 4 

Table 3 - 1. VLAN Example – Assigned Ports 

Port-based VLANs 

Port-based VLANs limit traffic that flows into and out of switch ports. Thus, all devices connected to a port are members of the 
VLAN(s) the port belongs to, whether there is a single computer directly connected to a switch, or an entire department. 

On port-based VLANs, NICs do not need to be able to identify 802.1Q tags in packet headers. NICs send and receive normal 
Ethernet packets. If the packet’s destination lies on the same segment, communications take place using normal Ethernet protocols. 
Even though this is always the case, when the destination for a packet lies on another switch port, VLAN considerations come into 
play to decide if the packet gets dropped by the Switch or delivered. 

VLAN Segmentation 

Take for example a packet that is transmitted by a machine on Port 1 that is a member of VLAN 2. If the destination lies on 
another port (found through a normal forwarding table lookup), the Switch then looks to see if the other port (Port 10) is a member 
of VLAN 2 (and can therefore receive VLAN 2 packets). If Port 10 is not a member of VLAN 2, then the packet will be dropped 
by the Switch and will not reach its destination. If Port 10 is a member of VLAN 2, the packet will go through. This selective 
forwarding feature based on VLAN criteria is how VLANs segment networks. The key point being that Port 1 will only transmit 
on VLAN 2. 

VLAN and Trunk Groups 

The members of a trunk group have the same VLAN setting. Any VLAN setting on the members of a trunk group will apply to 
the other member ports. 

 

NOTE:

 In order to use VLAN segmentation in conjunction with port trunk groups, first set the 

port trunk group(s), and then configure the VLAN settings. To change the port trunk grouping 
with VLANs already in place it is unnecessary to reconfigure the VLAN settings after changing 
the port trunk group settings. VLAN settings will automatically change in conjunction with the 
change of the port trunk group settings. 

To view the following window, click 

L2 Features

 > 

802.1Q VLAN

: 

 

Figure 3 - 6. VLAN List tab of the 802.1Q VLAN window  

Summary of Contents for DGS-3200-16 - Switch - Stackable


















































































































































































































































































Reviews:

No comments

Related manuals for DGS-3200-16 - Switch - Stackable

Water Witch 217 Installation Instructions preview
217
Brand: Water Witch Pages: 2
hager EMN005 User Instructions preview
EMN005
Brand: hager Pages: 2
hager HIC4 A Series Quick Start preview
HIC4 A Series
Brand: hager Pages: 4
hager EGN100 Manual preview
EGN100
Brand: hager Pages: 2
LaCie 1big Dock SSD Pro Quick Install Manual preview
1big Dock SSD Pro
Brand: LaCie Pages: 28
PRO SIGNAL PSG3450 Manual preview
PSG3450
Brand: PRO SIGNAL Pages: 5
Oehlbach UltraHD Switch 3:1 User Manual preview
UltraHD Switch 3:1
Brand: Oehlbach Pages: 20
Watchguard XTM 3 Series Hardware Manual preview
XTM 3 Series
Brand: Watchguard Pages: 26
G-Lab GSC-3 User Manual preview
GSC-3
Brand: G-Lab Pages: 12
Waeco PerfectView GPS300 Installation And Operating Manual preview
PerfectView GPS300
Brand: Waeco Pages: 72
Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual preview
SmartSTACK ETHERNET ELS10-27
Brand: Cabletron Systems Pages: 126
Aruba Instant On 1930 Series Installation, Safety, And Regulatory Information preview
Instant On 1930 Series
Brand: Aruba Pages: 8
3onedata IES2100SL Series Quick Installation Manual preview
IES2100SL Series
Brand: 3onedata Pages: 3
Versa Technology VX-GPH8245 User Manual preview
VX-GPH8245
Brand: Versa Technology Pages: 26
I-Tech CMS-6R4 User Manual preview
CMS-6R4
Brand: I-Tech Pages: 123
Bticino RW4003DCW Quick Start Manual preview
RW4003DCW
Brand: Bticino Pages: 2
MiLAN MIL-S500 User Manual preview
MIL-S500
Brand: MiLAN Pages: 12
H3C S9825 Series Manual preview
S9825 Series
Brand: H3C Pages: 34

Brands by name

Popular brands

Load more brands