xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
13
Port State
Describes the current running state of the port, whether enabled
or
disabled.
Connection Status
This field will read the uplink status of the individual ports, whether enabled or disabled.
Reason
Describes the reason why the port has been error-disabled, such as it has become a
shutdown port for storm control.
Static ARP Settings
The Address Resolution Protocol is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows
network managers to view, define, modify, and delete ARP information for specific devices.
Static entries can be defined in the ARP table. When static entries are defined, a permanent entry is entered and is used to translate
IP addresses to MAC addresses.
To view the following window, click
Configuration
>
Static ARP Settings
:
Figure 2- 12. Static ARP Settings window
The following parameters may be configured or viewed:
Parameter Description
ARP Aging Time
(0-65535)
The ARP entry age-out time, in seconds. The default is
20
minutes.
IP Address
The IP address of the ARP entry.
MAC Address
The MAC address of the ARP entry.
After entering a global ARP Aging Time in seconds, click
Apply
to allow it to take effect. The default value is
20
seconds.
After entering the IP Address and MAC Address of the Static ARP entry, click
Apply
to implement the new entry. To completely
clear the static ARP entries, click the
Delete All
button.
To modify a static ARP entry, click the
Edit
button located on the right side of the entry in the ARP table at the bottom of the
window.
To delete a static ARP entry, click the
Delete
button located on the right side of the entry in the static ARP table at the bottom of
the window.
