xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
172
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the
CPU
Access Profile List
window and click
Add/View Rules
for an IP entry. This
will open the following window.
Figure 6 - 34. CPU Access Rule List window for IPv4
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click the
Add Rule
button:
Figure 6 - 35. Add Access Rule window for IPv4
To set the Access Rule for IP, adjust the following parameters and click
Apply
Parameter Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify that packets that do not match the access profile are not forwarded by the
Switch and will be filtered.
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Time Range
Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the
Time Range
Settings
window. This will set specific times when this access rule
will be implemented on the Switch.
