D-Link DGS-3200-16 - Switch - Stackable Page 49 User Manual Download

Page: 49 / 273

xStack

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

SNMP User Table

This window

displays all of the SNMP User’s currently configured on the Switch.

To view the following window, click

Configuration

> SNMP User Table

Figure 2 - 40. SNMP User Table window

To delete an existing SNMP User Table entry, click the

Delete

button corresponding to the entry to delete.

To display the detailed entry for a given user, click on the

View

button. This will open the

SNMP User Table Display

window,

as shown below.

The following parameters are displayed:

Parameter Description

User Name

An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.

Group Name

This name is used to specify the SNMP group created can request SNMP messages.

SNMP Version

– Indicates that SNMP version 3 is in use.

SNMP V3
Encryption

Use the drop-down menu to enable encryption for SNMP V3. This is only operable in SNMP V3
mode. The choices are

None

Password

, or

Key

Auth-Protocol

MD5

– Specifies that the HMAC-MD5-96 authentication level will be used. This field is only

operable when

is selected in the SNMP Version field and the Encryption field has been

checked. This field will require the user to enter a password.

SHA

– Specifies that the HMAC-SHA authentication protocol will be used. This field is only

operable when

is selected in the SNMP Version field and the Encryption field has been

checked. This field will require the user to enter a password.

Priv-Protocol

None

– Specifies that no authorization protocol is in use.

DES

– Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56)

standard. This field is only operable when

is selected in the SNMP Version field and the

Encryption field has been checked. This field will require the user to enter a password between 8
and 16 alphanumeric characters.

To implement changes made, click

Apply

Summary of Contents for DGS-3200-16 - Switch - Stackable


















































































































































































































































































Search results

Summary of Contents for DGS-3200-16 - Switch - Stackable

Reviews:

Related manuals for DGS-3200-16 - Switch - Stackable

Brands by name

Popular brands

D-Link DGS-3200-16 - Switch - Stackable, User Manual

Search results

Summary of Contents for DGS-3200-16 - Switch - Stackable

Reviews:

Related manuals for DGS-3200-16 - Switch - Stackable

Brands by name

Popular brands