manualshive.com logo in svg

D-Link DGS-3200-16 - Switch - Stackable, User Manual

The D-Link DGS-3200-16 Stackable Switch is a reliable networking solution designed to streamline your connectivity needs. With this product, you can easily manage and expand your network, ensuring hassle-free operations. Enhance your user experience by downloading the free user manual from manualshive.com, providing step-by-step instructions and valuable insights for optimal usage.

Share
Download
background image

xStack

® 

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

 

126 

     

section, for more information. 

Enable Method List 

Using the pull-down menu, configure an application for normal login on the user level, 
utilizing a previously configured method list. The user may use the default Method List or 
other Method List configured by the user. See the 

Enable Method Lists

 window, in this 

section, for more information 

Click 

Apply

 to implement changes made. 

Authentication Server Group 

Users can set up Authentication Server Groups on the Switch. A server group is a technique used to group 
TACACS/XTACACS//RADIUS  server hosts into user-defined categories for authentication using method lists. The 
user may define the type of server group by protocol or by previously defined server group. The Switch has three built-in 
Authentication Server Groups that cannot be removed but can be modified. Up to eight authentication server hosts may be added 
to any particular group. 

To view the following window, click 

Security > Access Authentication Control > Authentication Server Group

: 

 

Figure 5 - 36. Server Group List tab of the Authentication Server Group window  

This window displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server Groups 
that cannot be removed but can be modified. To add a new Server Group, enter a name in the Group Name field and then click the 

Add

 button. To modify a particular group, click the 

Edit

 button (or the 

Edit Server Group

 tab), which will then display the 

following 

Edit Server Group

 tab:  

 

Summary of Contents for DGS-3200-16 - Switch - Stackable


















































































































































































































































































Reviews:

No comments

Related manuals for DGS-3200-16 - Switch - Stackable

Water Witch 217 Installation Instructions preview
217
Brand: Water Witch Pages: 2
KELCO E30 Installation & Programming Manual preview
E30
Brand: KELCO Pages: 41
H3C S5500-SI Series Configuration Manual preview
S5500-SI Series
Brand: H3C Pages: 130
H3C S5500-EI series Irf Command Reference preview
S5500-EI series
Brand: H3C Pages: 19
H3C S5500-EI series Quick Start Manual preview
S5500-EI series
Brand: H3C Pages: 91
H3C S5500-EI series Operation Manual – Port Security preview
S5500-EI series
Brand: H3C Pages: 24
H3C S5500-EI series Installation Manual preview
S5500-EI series
Brand: H3C Pages: 69
H3C S5120-SI Series Quick Start Manual preview
S5120-SI Series
Brand: H3C Pages: 4
H3C S5120-SI Series Command Reference Manual preview
S5120-SI Series
Brand: H3C Pages: 209
H3C S5120-SI Series Installation Manual preview
S5120-SI Series
Brand: H3C Pages: 70
H3C S5120-EI Series Irf Command Reference preview
S5120-EI Series
Brand: H3C Pages: 32
H3C S1526 User Manual preview
S1526
Brand: H3C Pages: 83
H3C S10500 Series Configuration Manual preview
S10500 Series
Brand: H3C Pages: 26
H3C S5500-SI Series Command Manual preview
S5500-SI Series
Brand: H3C Pages: 6
Harman Kardon ABH 4000 Owner'S Manual preview
ABH 4000
Brand: Harman Kardon Pages: 2
IBM 8271 Nways Ethernet LAN Switch User Manual preview
8271 Nways Ethernet LAN Switch
Brand: IBM Pages: 210
IBM 8275-416 User Manual preview
8275-416
Brand: IBM Pages: 156
CoolGear USBBG-12U2ML Installation Manual preview
USBBG-12U2ML
Brand: CoolGear Pages: 2

Brands by name

Popular brands

Load more brands