manualshive.com logo in svg

D-Link DGS-3200-16 - Switch - Stackable, User Manual

The D-Link DGS-3200-16 Stackable Switch is a reliable networking solution designed to streamline your connectivity needs. With this product, you can easily manage and expand your network, ensuring hassle-free operations. Enhance your user experience by downloading the free user manual from manualshive.com, providing step-by-step instructions and valuable insights for optimal usage.

Share
Download
background image

xStack

® 

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

 

202 

     

addresses. 

Identifier 

The NAS-Identifier of the RADIUS accounting client. (This is not necessarily the 
same as sysName in MIB II.) 

ServerAddr 

The (conceptual) table listing the RADIUS accounting servers with which the client 
shares a secret. 

ServerPortNumber 

The UDP port the client is using to send requests to this server. 

RoundTripTime 

The time interval between the most recent Accounting-Response and the 
Accounting-Request that matched it from this RADIUS accounting server. 

Requests 

The number of RADIUS Accounting-Request packets sent. This does not include 
retransmissions. 

Retransmissions 

The number of RADIUS Accounting-Request packets retransmitted to this RADIUS 
accounting server. Retransmissions include retries where the Identifier and Acct-
Delay have been updated, as well as those in which they remain the same. 

Responses 

The number of RADIUS packets received on the accounting port from this server. 

MalformedResponses 

The number of malformed RADIUS Accounting-Response packets received from 
this server. Malformed packets include packets with an invalid length. Bad 
authenticators and unknown types are not included as malformed accounting 
responses. 

BadAuthenticators 

The number of RADIUS Accounting-Response packets, which contained invalid 
authenticators, received from this server. 

PendingRequests 

The number of RADIUS Accounting-Request packets sent to this server that have 
not yet timed out or received a response. This variable is incremented when an 
Accounting-Request is sent and decremented due to receipt of an Accounting-
Response, a timeout or a retransmission. 

Timeouts 

The number of accounting timeouts to this server. After a timeout the client may 
retry to the same server, send to a different server, or give up. A retry to the same 
server is counted as a retransmit as well as a timeout. A send to a different server is 
counted as an Accounting-Request as well as a timeout. 

UnknownTypes 

The number of RADIUS packets of unknown type which were received from this 
server on the accounting port. 

PacketsDropped 

The number of RADIUS packets, which were received from this server on the 
accounting port and dropped for some other reason. 

Summary of Contents for DGS-3200-16 - Switch - Stackable


















































































































































































































































































Reviews:

No comments

Related manuals for DGS-3200-16 - Switch - Stackable

La Toulousaine 1400 Installation Manual preview
1400
Brand: La Toulousaine Pages: 6
Radial Engineering SW8 Owner'S Manual preview
SW8
Brand: Radial Engineering Pages: 12
Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
Festo SOEL-RTH-Q20 Manual preview
SOEL-RTH-Q20
Brand: Festo Pages: 2
Raritan MCD-LED17 series User Manual preview
MCD-LED17 series
Brand: Raritan Pages: 89
Avenview SW-DVI-2X4 User Manual preview
SW-DVI-2X4
Brand: Avenview Pages: 10
Ametek SIL IntelliPoint RF S*R*L Series Installation And Operating Instructions Manual preview
SIL IntelliPoint RF S*R*L Series
Brand: Ametek Pages: 93
Cabletron Systems MicroMMAC-22E Installation Manual preview
MicroMMAC-22E
Brand: Cabletron Systems Pages: 83
Grizzly G8988 Instructions preview
G8988
Brand: Grizzly Pages: 2
Pathway connectivity solutions 6716 User Manual preview
6716
Brand: Pathway connectivity solutions Pages: 34
Harman AMX PR01-0808 User Manual preview
AMX PR01-0808
Brand: Harman Pages: 50
Tabs TBGW100-915 Reference Manual preview
TBGW100-915
Brand: Tabs Pages: 4
cable matters 201063 User Manual preview
201063
Brand: cable matters Pages: 12
nedis VMAT3482AT Manual preview
VMAT3482AT
Brand: nedis Pages: 24
Hubner EGS 2 Operating And Assembly Instructions Manual preview
EGS 2
Brand: Hubner Pages: 23
InHand InSwitch ISM-P Series Web Config Manual preview
InSwitch ISM-P Series
Brand: InHand Pages: 81

Brands by name

Popular brands

Load more brands