DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
64
SNMP Host Table
Use the SNMP Host Table to set up trap recipients.
Figure 6 - 31. SNMP Host Table
To delete an existing entry, click the selection button on the far left that corresponds to the port you want to configure and click
the Delete button. To create a new entry, click the New button, a separate menu will appear.
Figure 6 - 32. SNMP Host Table – Add New
Parameter
Description
IP Address
Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
From the pull-down menu select:
V1 – To specifies that SNMP version 1 will be used.
V2 – To specify that SNMP version 2 will be used.
V3 – To specify that the SNMP version 3 will be used.
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
Summary of Contents for DES-3226S
Page 126: ......
