manualshive.com logo in svg

D-Link DES-3226S, User Manual

The D-Link DES-3226S is a high-performance switch designed to meet the needs of small to medium-sized businesses. With advanced technical specifications, this product offers seamless connectivity and enhanced network management. To gain a comprehensive understanding of its features, you can download the user manual for free from our website, manualshive.com.

Share
Download
background image

 

 

 

 

 Registration 

Card 

 

Print, type or use block letters. 

Your name: Mr./Ms______________________________________________________________________ 
Organization: ________________________________________Dept.______________________________ 
Your title at organization:_________________         Telephone:_____________________ Fax:___________ 
Organization's full address:_______________________________________________________________ 
Country:______________________________________________________________________________ 
Date of purchase (Month/Day/Year):_________________________________________________________

 

Product 

Model 

Product Serial No. 

* Product installed in type of 

computer (e.g., Compaq 486) 

* Product installed in computer serial 

No. 

 

 

 

 

 

 

 

 

 

 

 

 

(* Applies to adapters only) 

Product was purchased from: 

Reseller's name:________________________________________________________________________ 
Telephone:________________________________ Fax:_________________________________________ 
Reseller's full address:___________________________________________________________________ 
______________________________________________________________________________________ 

Answers to the following questions help us to support your product: 

1. Where and how will the product primarily be used? 

 

Home  Office  Travel  Company Business  Home Business  Personal Use 

2. How many employees work at installation site? 

 

1 employee  2-9  10-49  50-99  100-499  500-999  1000 or more 

3. What network protocol(s) does your organization use ? 

 

XNS/IPX  TCP/IP  DECnet  Others_____________________________________________________ 

4. What network operating system(s) does your organization use ? 

 

D-Link LANsmart  Novell NetWare  NetWare Lite  SCO Unix/Xenix  PC NFS  3Com 3+Open 

 

Banyan Vines  DECnet Pathwork  Windows NT  Windows NTAS  Windows '95 

 

Others_____________________________________________________________________________ 

5. What network management program does your organization use ? 

 

D-View  HP OpenView/Windows  HP OpenView/Unix  SunNet Manager  Novell NMS 

 

NetView 6000  Others_________________________________________________________________ 

6. What network medium/media does your organization use ? 

 

Fiber-optics  Thick coax Ethernet  Thin coax Ethernet  10BASE-T UTP/STP 

 

100BASE-TX  100BASE-T4  100VGAnyLAN  Others________________________________________ 

7. What applications are used on your network? 

Desktop publishing  Spreadsheet  Word processing  CAD/CAM  Database management  Accounting 
Others____________________________________________________________________ 

8. What category best describes your company? 

Aerospace  Engineering  Education  Finance  Hospital  Legal  Insurance/Real Estate  Manufacturing   
Retail/Chainstore/Wholesale  Government  Transportation/Utilities/Communication  VAR  System house/company 
Other_____________________________________________________ 

9. Would you recommend your D-Link product to a friend? 

 

Yes  No  Don't know yet 

10.Your comments on this product?  

_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________ 

 

 

Summary of Contents for DES-3226S































































































































Reviews:

No comments

Related manuals for DES-3226S

D-Link DKVM-IP1 Manual preview
DKVM-IP1
Brand: D-Link Pages: 73
DANLERS WAPIR Installation Notes preview
WAPIR
Brand: DANLERS Pages: 2
Edimax GS-1016 Datasheet preview
GS-1016
Brand: Edimax Pages: 2
ORVIBO ZigBee Mini Hub Faq preview
ZigBee Mini Hub
Brand: ORVIBO Pages: 3
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
SMART Hub VE220 Installation And User Manual preview
Hub VE220
Brand: SMART Pages: 46
Mach Power NW-SP4-001 Installation Manual preview
NW-SP4-001
Brand: Mach Power Pages: 12
Accton Technology ES4626 Management Manual preview
ES4626
Brand: Accton Technology Pages: 523
Cabletron Systems SmartSwitch SBU128 User Manual preview
SmartSwitch SBU128
Brand: Cabletron Systems Pages: 76
MTHTrains RealTrax O-3 User Manual preview
RealTrax O-3
Brand: MTHTrains Pages: 16
A10 Thunder series 930 Installation Manual preview
Thunder series 930
Brand: A10 Pages: 44
Raritan TMCAT17 series Quick Setup Manual preview
TMCAT17 series
Brand: Raritan Pages: 7
Belkin OMNICUBE F1DK102P Quick Installation Manual preview
OMNICUBE F1DK102P
Brand: Belkin Pages: 21
TRENDnet TE100-S16plus User Manual preview
TE100-S16plus
Brand: TRENDnet Pages: 32
Leviton 47693-ESM Product Specifications preview
47693-ESM
Brand: Leviton Pages: 2
Abtus AVS-HDMI81 User'S Operation Manual preview
AVS-HDMI81
Brand: Abtus Pages: 4
PortaOne PortaSwitch Handbook preview
PortaSwitch
Brand: PortaOne Pages: 78
Digital China Networks DCRS-5200 Series Specifications preview
DCRS-5200 Series
Brand: Digital China Networks Pages: 4

Brands by name

Popular brands

Load more brands