DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
99
Configure the following Access Profile Mask settings:
Parameter
Description
Profile ID
Type in a unique identifier number for this profile set or allow an ID to be automatically
assigned by checking the Auto Assign option. This value can be set from 1 – 255.
Access Profile
Select profile based on Ethernet (MAC Address) or IP address. This will change the menu
according to the requirements for the type of profile. Select Ethernet to instruct the Switch
to examine the layer 2 part of each packet header. Select IP to instruct the Switch to
examine the IP address in each frame’s header.
VLAN
Selecting this option instructs the Switch to examine the VLAN part of each packet header
and use this as the, or part of the criterion for forwarding.
Source MAC/IP
Mask
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Source IP Mask - Enter an IP address mask for the source IP address.
Destination MAC/IP
Mask
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Destination IP Mask - Enter an IP address mask for the destination MAC address.
802.1p
Selecting this option instructs the Switch to examine the 802.1p priority value of each
packet header and use this as the, or part of the criterion for forwarding.
DSCP
Selecting this option instructs the Switch to examine the DiffServ Code part of each
packet header and use this as the, or part of the criterion for forwarding.
Ethernet Type
(for Ethernet Access
Profiles only)
Selecting this option instructs the Switch to examine the Ethernet type value in each
frame’s header.
Protocol
(for IP address Access
Profiles only)
Selecting this option instructs the Switch to examine the protocol type value in each
frame’s header. You must then specify what protocol(s) to include according to the
following guidelines:
Select ICMP to instruct the Switch to examine the Internet Control Message Protocol
(ICMP) field in each frame’s header.
Select Type to further specify that the access profile will apply an ICMP type value, or
specify Code to further specify that the access profile will apply an ICMP cod value.
Select IGMP to instruct the Switch to examine the Internet Group Management Protocol
(ICMP) field in each frame’s header.
Select Type to further specify that the access profile will apply an IGMP type value
Select TCP to use the TCP port number contained in an incoming packet as the
forwarding criterion. Selecting TCP requires that you specify a source port mask and/or a
destination port mask.
Source Port Mask Ox - Specify a TCP port mask for the source port in hex form (hex 0x0-
0xffff).
Destination Port Mask Ox - Specify a TCP port mask for the destination port in hex form
(hex 0x0-0xffff).
Select UDP to use the UDP port number contained in an incoming packet as the
forwarding criterion. Selecting UDP requires that you specify a source port mask and/or a
destination port mask.
Source Port Mask Ox - Specify a TCP port mask for the source port in hex form (hex 0x0-
0xffff).
Destination Port Mask Ox - Specify a TCP port mask for the destination port in hex form
(hex 0x0-0xffff).
Permit/Deny
Select permit to specify that the packets that match the access profile are forwarded by
the Switch according to any additional rule added (see below).
Select deny to specify that packets that do not match the access profile are not forwarded
by the Switch and will be filtered.
Summary of Contents for DES-3226S
Page 126: ......
