D-Link DES-3226S, User Manual

Page: 109 / 126

DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
102
Set the following parameters for Syslog service:
Parameter Description
Index Syslog server settings index (1-4).
Server IP Type in the IP address of the Syslog server receiving the message.
Severity Select the level of message sent, select: Warning , Information or All .
Facility
Some of the operating system daemons and processes have been assigned Facility
values. Processes and daemons that have not been explicitly assigned a Facility may
use any of the "local use" facilities or they may use the "user-level" Facility. Those
Facilities that have been designated are shown in the following: Bold font means the
facility values the Switch supports now.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
UDP Port Type the UDP port number used for sending Syslog messages. The default is 514.
Status Choose Enabled or Disabled to activate or deactivate this
System Log State
To enable the System Log Server settings you have chosen select Enabled and click the Apply button in the System Log State
menu.
Figure 6 - 89. System Log State menu