DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
56
Figure 6 - 20. Traffic Segmentation – Edit
To configure Traffic Segmentation for a port, select the ports from the Port List that are allowed to receive forwarded frames
from the port that is being configured. Click the Apply button to add the ports to the forward list.
Serial Port Settings
The
Serial Port Settings
window allows the configuration of the Switch’s serial port.
Click on the
Serial Port Settings
link from the
Basic Setup
folder.
Figure 6 - 21. Serial Port Settings
The following fields can then be set for the serial port:
Parameter
Description
Baud Rate
Set the serial bit rate used to communicate with a management station. The console baud
rate is 9600 bits per second.
Data Bits
Displays the number of bits that make up a word when communicating with the
management station. The console interface uses 8 data bits.
Stop Bits
Displays the number of bits used to indicate that a word has been completely transmitted.
The console interface uses 1 stop bit.
Auto-Logout
This sets the time the interface can be idle before the Switch automatically logs-out the
user. The options are
2 mins, 5 mins, 10 mins, 15 mins,
or
Never
.
Summary of Contents for DES-3226S
Page 126: ......
