D-Link DES-1228 - Web Smart Switch User Manual Download | Manualshive

Page: 6 / 76

background image

1 Hardware Installation

D-Link Web Smart Switch User Manual

1

Hardware Installation

This chapter provides unpacking and installation information for the D-Link Web-Smart Switch.

Step1: Unpacking

Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the
User Manual to make sure all items are present and undamaged. If any item is missing or damaged, please
contact your local D-Link reseller for replacement.

One D-Link Web-Smart Switch

One AC power cord

Four

rubber

feet

Screws and two mounting brackets

One Multi-lingual Getting Started Guide

User’s Guide CD with SmartConsole Utility program

If any item is found missing or damaged, please contact the local reseller for replacement.

Step2: Switch Installation

For safe switch installation and operation, it is recommended that you:

Visually inspect the power cord to see that it is secured fully to the AC power connector.

Make sure that there is proper heat dissipation and adequate ventilation around the switch.

Do not place heavy objects on the switch.

Desktop or Shelf Installation

When installing the switch on a desktop or shelf, the rubber feet included with the device must be attached
on the bottom at each corner of the device’s base. Allow enough ventilation space between the device and
the objects around it.

Figure 1 – Attach the adhesive rubber pads to the bottom

Rack Installation

The switch can be mounted in an EIA standard size 19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets to the switch’s side panels (one on each side) and
secure them with the screws provided (please note that these brackets are not designed for palm size
switches).

Figure 2 – Attach the mounting brackets to the Switch

2

2

«
...
4
5
6
7
8
...
»

Summary of Contents for DES-1228 - Web Smart Switch













































































Reviews:

No comments

Related manuals for DES-1228 - Web Smart Switch

Enterprise Filter Authentication R3000

Brand: 8e6 Technologies Pages: 66

Brand: REXROTH Pages: 68

Brand: Ebyte Pages: 14

Brocade X6-8 Director

Brand: Broadcom Pages: 207

Brand: Juniper Pages: 190

Brand: Fracarro Pages: 12

MultiConnect SE MTS2EA

Brand: Multitech Pages: 2

Brand: Abocom Pages: 2

Brand: protech Pages: 95

Brand: Valcom Pages: 4

Brand: IBM Pages: 34

Brand: ZALMAN Pages: 7

Brand: C-Smartlink Pages: 7

Brand: Patton Pages: 62

Brand: Wave Wireless Networking Pages: 167

Brand: National Instruments Pages: 121

Brand: Netequalizer Pages: 14

Brand: Valcom Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands