D-Link DES-1228 - Web Smart Switch User Manual Download

Page: 45 / 76

5 Configuration

D-Link Web Smart Switch User Manual

Monitoring > Statistics

The Statistics screen displays the status of each port packet count.

Figure 68 – Monitoring > Statistics

Refresh:

To renew the details collected and displayed.

Clear Counter:

To reset the details displayed.

TxOK:

Number of packets transmitted successfully.

RxOK:

Number of packets received successfully.

TxError:

Number of transmitted packets resulting in error.

RxError:

Number of received packets resulting in error.

To view the statistics of individual ports, click one of the linked port numbers for details.

Figure 69 – Monitoring > Port Statistics

Summary of Contents for DES-1228 - Web Smart Switch













































































Search results

Summary of Contents for DES-1228 - Web Smart Switch

Reviews:

Related manuals for DES-1228 - Web Smart Switch

Brands by name

Popular brands

D-Link DES-1228 - Web Smart Switch, User Manual

Search results

Summary of Contents for DES-1228 - Web Smart Switch

Reviews:

Related manuals for DES-1228 - Web Smart Switch

Brands by name

Popular brands