![background image](http://html.mh-extra.com/html/d-link/dcs-4705e/dcs-4705e_user-manual_77632009.webp)
9
D-Link DCS-4705E User Manual
Section 2: Installation
Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it. Refer to
"Software Installation" on page 14
for more
information.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the
wall anchors into the holes.
Step 2
If you are running the camera cables through the wall
, drill a hole in the center and pull
the cables through the hole.
Step 3
Use the screws provided to mount the camera to the wall.
If you are running the camera cables out the side of the camera
, guide the camera cables
through the cable channel on the base.