![background image](http://html.mh-extra.com/html/d-link/dcs-4705e/dcs-4705e_user-manual_77632035.webp)
35
D-Link DCS-4705E User Manual
Section 3: Configuration
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync With ICR:
Schedule:
The Day/Night mode is set automatically. Generally, the camera uses Day
mode and switches to Night mode when needed. Use the
Sensitivity
drop-
down box to select when the camera should switch to Night mode. The text
to the right of the drop-down box shows what the current lighting conditions
are like, and you can refresh this information by clicking the
Refresh
button.
Day mode enables the IR Cut Filter and turns off the IR LEDs.
Night mode disables the IR Cut Filter and turns on the IR LEDs.
Set Day/Night mode using the schedule set in the drop-down boxes. The
camera will enter Day mode at the starting time and return to Night mode
at the ending time.
Activate the
Disable IR LED
to set Day mode for the set times.
The camera can enable or disable the IR (infrared) light according to your
preferences. This setting provides additional controls depending on your
specific application.
Disables the IR light.
Enables the IR light.
The IR light will turn on when the ICR filter is disabled (night mode).
The IR light will turn on or off according to the schedule that you specify
below.
ICR & IR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
ICR
IR Light