D-Link DCS-3110 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
Rear View
Microphone Connector:
The camera has an internal
built-in microphone. To use an
external microphone, plug it into
the microphone connector.
Audio Out Connector:
Use the Audio Out connector for 2-way audio
connection. Speakers (not included) may be
connected to the camera for 2-way audio
communication.
DI/DO:
The DCS-3110 provides a general I/O terminal block.
The I/O connectors provide the physical interface to
send and receive digital signals to and from a variety
of external devices.
DC12V output :
Support for external device (like IR light)
RS485:
Port is designed for external pan/tilt/zoom devices.
Ethernet Port (PoE)
Connect the Network Camera to your network
using a CAT5 Ethernet cable. This port
supports the NWay protocol, allowing the
network camera to automatically detect or
negotiate the transmission speed of the
network.
The Ethernet port can also be used to power
the camera by using a PoE switch.
Status LED
Blinking Red: indicates power is
being supplied to the camera.
Solid Green: indicates that a
connection has been established
via Ethernet port.
Blinking Green: indicates traffic
movement in the camera.
If the Ethernet connection is not
established the Status LED will
not glow.
Mic On/Off Switch:
Select to turn the microphone
On or Off.
Reset Button
Reset is initiated when the reset
button is pressed once and held 30
seconds until the power LED flashes
through its cycle twice.
Power Receptor
Receptor for the supplied
power adapter.
Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera
Page 1: ......
Page 71: ...71 D Link DCS 3110 User Manual Section 4 Configuration Help ...
