D-Link DCS-3110 - SECURICAM Fixed Network Camera User Manual Download

Page: 88 / 96

D-Link DCS-3110 User Manual

Appendix C - Technical Specifications

SYSTEM REQUIREMENTS

• Operating System: Microsoft Windows

XP/Vista

• Browser: Internet Explorer, Firefox, Netscape, Mozilla, Opera browser

SUPPORTED PDA, MOBILE PHONES & SOFTWARE

Handsets with 3GPP player
•  Packet Video Player 3.0
•  QuickTime 6.5
•  Real Player 10.5

PHYSICAL & ENVIRONMENTAL
LAN

•  IEEE 802.3 compliance
•  IEEE 802.3u compliance
•  Support Full-Duplex operations
•  802.3x Flow Control support for Full-Duplex mode
•  Supported IEEE 802.3af standard (PoE)

FRONT-END STORAGE

• CF card slot for local recording of MP4 file

EXTERNAL DEVICE INTERFACE

•  One D/I and one D/O for external sensor and alarm
•  RS485 interface for external scanner
•  DC12V output for external accessory

DIAGNOSTIC LED

• 2 color LED

POWER INPUT

• 100-240Vac, 50/60Hz, 12V, 1.25Adc.

POWER CONSUMPTION

• MAX 4 W

DIMENSIONS

• 80 (W) X 143.8 (D) X 62 (H) (MM)

WEIGHT

• 521 gm

OPERATION TEMPERATURE

• 0º to 40º C (32º to 104º F)

STORAGE TEMPERATURE

• -20º to 70º C (-4º to 158º F)

HUMIDITY

• 20% to 80% non-condensing

EMISSION (EMI), SAFETY & OTHER CERTIFICATIONS

•  FCC
•  CE
•  C-Tick

The mobile device must have 3G support and subscribe to 3G service from the phone service

provider. The playback device must be equipped with 3G video playback such as RealPlayer

or PacketVideo

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

































































































Search results

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

Reviews:

Related manuals for DCS-3110 - SECURICAM Fixed Network Camera

Brands by name

Popular brands

D-Link DCS-3110 - SECURICAM Fixed Network Camera, User Manual

Search results

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

Reviews:

Related manuals for DCS-3110 - SECURICAM Fixed Network Camera

Brands by name

Popular brands