D-Link DCS-3110 User Manual
Section - Frequently Asked Questions
8. I connected the Network Camera directly to a computer with a cross-over Ethernet cable and received a
Windows error upon running the installation Wizard?
• This Windows error will occur if the Megapixel PoE Network Camera is connected to a computer that is not properly configured with a
valid IP address. Turn off DHCP from the Network Settings in Windows and configure the computer with a valid IP address or connect
the camera to a router with DHCP enabled.
• This error can also occur if the Installation Wizard icon had been clicked more than once from the setup wizard.
9. Noisy images occur. How can I solve the problem?
The video images might be noisy if the Megapixel PoE Network Camera is used in a very low light environment. To solve this issue you
need more lighting.
10. The images appear to be of poor quality, how can I improve the image quality?
• Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256 colors on your computer will produce
dithering artifacts in the image, making the image appear to be of poor quality.
• The configuration on the Megapixel PoE Network Camera image display is incorrect. Through the
Setup > Image Setup section of the
Web management you need to adjust the image related parameters such as brightness, white balance and power line frequency for
fluorescent light.
Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera
Page 1: ......
Page 71: ...71 D Link DCS 3110 User Manual Section 4 Configuration Help ...
