D-Link DCS-3110 - SECURICAM Fixed Network Camera User Manual Download

Page: 67 / 96

D-Link DCS-3110 User Manual

Section - Configuration

Turn off the LED

indicator:

Restore:

Reboot:

Select this option to turn off the LED next to the
lens. This will prevent anyone from observing the
operation of the network camera.

Click the

Restore button to reset the camera back

to its factory default settings. This will remove
all the configuration settings that were made
previously.

Click the

Reboot button to restart the camera.

Backup and Restore

The Backup and Restore page will allow you to turn the front panel LED off, restore factory default settings, and reboot
the camera.

Note:

Please format your CF card before use. All data in the CF card will be erased after formatting.

Note:

Before you unplug the CF card from the slot, please select

Remove CF card to ensure that your data has been completely stored

before the removal.

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

































































































Search results

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

Reviews:

Related manuals for DCS-3110 - SECURICAM Fixed Network Camera

Brands by name

Popular brands

D-Link DCS-3110 - SECURICAM Fixed Network Camera, User Manual

Search results

Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera

Reviews:

Related manuals for DCS-3110 - SECURICAM Fixed Network Camera

Brands by name

Popular brands