0
D-Link DCS-3110 User Manual
Section - Configuration
1. Click
New to add a new motion detection window.
2. Enter a name in the
Window Name field.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the
Sensitivity and
Percentage slide bar.
4. Click
Save to apply the changes.
5. Select
Enable motion detection to activate motion detection.
Note: Drag to resize the window and click X to close the window.
The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network
Camera and are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion detection window will
be outlined in red. Utilizing this device as a trigger source, photos or videos can be captured instantly and sent to the
remote server (Email, FTP).
A green bar indicates that even though motions are detected, the event will not be triggered because the image variations
are still falling under the defined threshold.
Percentage = 30%
To enable motion detection, follow the steps below:
Summary of Contents for DCS-3110 - SECURICAM Fixed Network Camera
Page 1: ......
Page 71: ...71 D Link DCS 3110 User Manual Section 4 Configuration Help ...
