D-Link DAP-3662 User Manual Download Page 64

Page: 64 / 94

D-Link DAP-3662 User Manual

Section 3 - Configuration

This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you

enable DHCP server on the AP and assign dynamic and static IP address pools.

Current DHCP

Dynamic

Pools:

Binding MAC

Address:

Assigned IP

Address:

Lease Time:

Current DHCP

Static Pools:

Binding MAC

Address:

Assigned IP

Address:

These are IP address pools the DHCP server has assigned

using the dynamic pool setting.

The MAC address of a device on the network that is

assigned an IP address from the DHCP dynamic pool.

The current corresponding DHCP-assigned IP address of

the device.

The length of time that the dynamic IP address will be

valid.

These are the IP address pools of the DHCP server assigned

through the static pool settings.

The MAC address of a device on the network that is within

the DHCP static IP address pool.

The current corresponding DHCP-assigned static IP

address of the device.

Current IP Mapping List

Summary of Contents for DAP-3662































































































Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands

D-Link DAP-3662, User Manual

Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands