33
D-Link DAP-3662 User Manual
Section 3 - Configuration
11n Preferred:
Network Utilization:
Aging out:
RSSI Threshold:
Data Rate Threshold:
ACL RSSI:
ACL RSSI Threshold:
Use the drop-down menu to
Enable
the 11n Preferred function. The wireless clients with 802.11n protocol will have
higher priority to connect to the device.
Set the maximum utilization of this access point for service. The DAP-3662 will not allow any new clients to associate
with the AP if the utilization exceeds the value the user specifies. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached, the device will pause one minute to allow net-
work congestion to dissipate.
Use the drop-down menu to select the criteria of disconnecting the wireless clients. Available options are
RSSI
and
Data
Rate
.
When
RSSI
is selected in the
Aging out
drop-down menu, select the percentage of RSSI here. When the RSSI of wireless
clients is lower than the specified percentage, the device disconnects the wireless clients.
When
Data Rate
is selected in the
Aging out
drop-down menu, select the threshold of data rate here. When the data
rate of wireless clients is lower than the specified number, the device disconnects the wireless clients.
Use the drop-down menu to
Enable
the function. When enabled, the device denies the connection request from the
wireless clients with the RSSI lower than the specified threshold below.
Set the ACL RSSI Threshold.
