D-Link DAP-3662 User Manual Download Page 37

Page: 37 / 94

D-Link DAP-3662 User Manual

Section 3 - Configuration

VLAN Port List

The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP

server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described

in the IEEE 802.1Q standard. Once you have made the desired settings, click the

Save

button to let your changes take effect.

VLAN Status:

VLAN Mode:

Port Name:

Tag VID:

Untag VID:

PVID:

Click the

Enable

radio button. Next, click the

Add/

Edit VLAN

tab to add or modify an item on the VLAN

List tab.

The current VLAN mode is displayed.

The name of the port is displayed in this column.

The Tagged VID is displayed in this column.

The Untagged VID is displayed in this column.

The Port VLAN Identifier is displayed in this column.

Summary of Contents for DAP-3662































































































Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands

D-Link DAP-3662, User Manual

Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands