30
D-Link R15 User Manual
Section 3 - Configuration
IPv4 - PPPoE
Select
PPPoE
(Point-to-Point Protocol over Ethernet) if your ISP requires you to enter a PPPoE username and password in
order to connect to the Internet. Click
Save
at any time to save the changes you have made on this page.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Reconnect Mode
Select either
Always on
,
On Demand
, or
Manual
.
Maximum Idle Time
Configurable when
On Demand
is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select
Always on
or
Manual
as the reconnect mode. The default is 5 minutes.
Advanced Settings...
Address Mode
Select
Static IP
if the following information has been provided
by your ISP: IP address, MTU, and DNS server addresses. In most
cases, select
Dynamic IP
.
Advanced Settings... - Dynamic IP
Address Mode
Shows your chosen address mode.
Service Name
Enter the ISP service name (optional)
Primary DNS Server
Enter the primary DNS server IP address assigned by your ISP.
