79
D-Link R15 User Manual
Section 3 - Configuration
Static Routes - IPv4
Go to
Features >
Static Routes
to define custom routes to control how traffic moves around your network.
To configure the Static Route IPv6 settings, click the
IPv6
tab. Refer to
Click
Save
at any time to save the changes you have made on this page.
If you click on
Edit
or
Add Route
, the following options will appear:
Name
Enter a name for the route.
Destination Network
Enter the destination IP address of the subnetwork.
Mask
Enter the subnet mask of the destination address.
Gateway
Enter the IP address of the next hop, which is the gateway to
the remote network.
Metric
Enter a route metric value between 1
and 16. This value
indicates the cost of using this route.
Interface
Select the interface that the IP packet will use to transit out of
the router when this route is used.
If you wish to remove a rule, click
in the Delete column. If you wish to edit a rule,
click
in the Edit column. If you wish to create a new rule, click the
Add Rule
button.
