D-Link AX1500, Product Overview

Page: 76 / 175

71 D-Link R15 User Manual
Section 3 - Configuration
Firewall
Go to
Features > Firewall
to configure the router’s firewall settings. The firewall feature helps protect your network from
malicious attacks over the Internet.
To configure the IPv4 firewall rules, click the IPv4 Rules tab. Refer to Firewall Settings - IPv4/IPv6 Rules on page 73
To configure the IPv6 firewall rules, click the
IPv6 Rules
tab. Refer to
Firewall Settings - IPv4/IPv6 Rules
on page
73
Click
Save
at any time to save the changes you have made on this page.
Enable DMZ
Enable or disable Demilitarized Zone (DMZ). Devices in this
zone are completely exposed to threats over the Internet.
This is not recommended unless they are servers that must
be exposed to the WAN.
DMZ IP Address
If you enable DMZ, enter the IP address of the client to be
placed in this zone, or use the drop-down menu to quickly
select one of the clients.
Enable SPI IPv4
Enabling Stateful Packet Inspection (SPI) or dynamic packet
filtering helps prevent cyber attacks by tracking more states
per session to validate that the traffic passing through the
session conforms to the protocol.
Enable Anti-spoof
Checking
Enable this feature to help protect your network from certain
kinds of “spoofing” attacks.
IPv6 Simple Security
Enable or disable IPv6 simple security. A simple firewall
configuration that denies access directly to computers behind
the router.
IPv6 Ingress Filtering
Enable or disable IPv6 ingress filtering for incoming packets
to prevent suspicious senders.