34
D-Link R15 User Manual
Section 3 - Configuration
IPv4 - L2TP
Choose
L2TP
(Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses an L2TP connection. Your ISP will
provide you with a username and password. Click
Save
at any time to save the changes you have made on this page.
L2TP Server
Enter the L2TP server IP address provided by your ISP.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Reconnect Mode
Select
Always on
,
On Demand
, or
Manual
.
Maximum Idle Time
Configurable when
On Demand
is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select
Always on
or
Manual
as the reconnect mode. The default is 5 minutes.
Advanced Settings...
Address Mode
Select
Static IP
if the following information is given by your ISP:
IP address, subnet mask, gateway, and DNS server addresses.
In most cases, select
Dynamic IP
.
Advanced Settings... - Dynamic IP
Address Mode
Shows your chosen address mode.
Primary DNS Server
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS Server
Enter the secondary DNS server IP address assigned by your
ISP.
