CY8CKIT-026 CAN and LIN Shield Kit Guide, Doc. No. 002-03798 Rev. *C
33
Kit Operation
Figure 4-3. CAN Analyzer Connection to CY8CKIT-026’s CAN2 Transceiver
If you use a CAN bus analyzer or emulator tool to communicate with this kit, then the tool must be
set up to send and receive CAN messages (at proper intervals) with proper length and message ID
and at a proper baud rate.
If you use any other CAN node to communicate with this kit, then you may need to modify the
firmware to allow communication. You can modify the code examples, firmware, or settings of the
other CAN node. See the
Example Projects chapter on page 37
for more details on the CAN
controller hardware configurations of this kit’s code examples.
