CY8CKIT-026 CAN and LIN Shield Kit Guide, Doc. No. 002-03798 Rev. *C
37
5.
Example Projects
The CY8CKIT-026 CAN and LIN Shield Kit includes five example projects. This chapter explains
how to use these example projects. To access the example projects, download and install the
CY8CKIT-026 CAN and LIN Shield Kit setup file from
. After
installation, the kit example projects will be available in the Firmware folder in the installation
location.
5.1
Using the Kit Example Projects
Perform these steps to open and use the example projects:
1. Launch PSoC Creator from
Start
>
All Programs
>
Cypress > PSoC Creator <version>
>
PSoC Creator <version>
.
2. On the Start page, expand
CY8CKIT-026 CAN and LIN Shield Kit
under
Examples and Kits
>
Kits
. A list of example projects appears, as shown in
3. Click on the desired example project, select a location to save the project and click
OK
.
Figure 5-1. Open Example Project from PSoC Creator
