23
6.7 RS-232 and Telnet Commands
COMMAND
Description and Parameters
help
Show the full command list.
?
Show the full command list.
help N1
Show help details about command N1.
N1
= {Command}
get model name
Show the unit's model name.
get fw ver
Show the unit’s current firmware version.
set factory default
Reset all settings to the factory defaults.
set factory ipconfig
default
Reset the IP configuration to the factory
defaults.
set factory out route default
Reset output routing to the factory
defaults.
set system reboot
Reboot the unit.
set ip mode N1
Set the IP address assignment mode.
Available values for
N1
:
0 [Static IP Mode]
1 [DHCP Mode]
Summary of Contents for PUV-2600RX
Page 2: ......
