28
COMMAND
Description and Parameters
get in type list
List the signal format of all inputs.
get out type list
List the signal format of all outputs.
set out route N1N2,N1N2
Set unique input routing for both outputs simultaneously.
N1
= A ~ B
[Output port]
N2
= 1 ~ 2
[Input port]
set all out route N1
Set input routing for all outputs.
N1
= 1 ~ 2
[Input port]
get all out route
List the current input routing for all outputs.
set out N1 cec data N2
Send a CEC command, as hex data, to the display connected to the
specified output.
N1
= A ~ B
[Output port]
N2
= {CEC data}
[Comma delimited hex pairs]
get out N1 cec capability
Show if the display connected to the specified output supports CEC.
N1
= A ~ B
[Output port]
set keylock N1
Enable or disable the front panel key lock.
Available values for
N1
:
ON [Locked]
OFF [Unlocked]
Summary of Contents for PUV-2600RX
Page 2: ......
