21
6.5.6 System Tab
This tab provides system information, network configuration options,
system configuration resets, and firmware update functions.
1) System:
■
Web User Setting:
This section provides a way to change the
password for the Administrator account. Click on “Save” to confirm
and activate any changes made to these settings.
Note: The default username and password is “admin”.
■
Network:
The unit’s IP mode may be switched between Static IP
or DHCP. In Static IP mode the IP, netmask and gateway addresses
may be manually set. When in DHCP mode, the unit will attempt
to connect to a local DHCP server and obtain IP, netmask and
gateway addresses automatically. Please press “Save” after making
any changes to the IP configuration or mode.
Note: If the IP address is changed then the IP address required for
WebGUI/Telnet access will also change accordingly.
■
Reset to Default:
Press the “Routing Reset” button to reset all I/O
routing configurations to the factory defaults. Press the “Factory
Reset” button to reset the unit to its factory default state. After the
Summary of Contents for PUV-2600RX
Page 2: ......
