CYP PUV-2600RX, Operation Manual

Page: 22 / 44

22
factory reset is complete, the unit will reboot automatically.
■
Web Login Timeout: Select the length of time to wait before
logging the user out of the WebGUI due to inactivity. Available
range is from 1 to 65535 minutes. Setting this to 0 will disable the
inactivity timeout.
■ Firmware Upgrade:
To update the unit's firmware, click the
“Choose File” button to open the file selection window and then
select the firmware update file (*.bin format) located on your local
PC. After selecting the file, click the “Upgrade” button to begin the
firmware update process. After the upgrade is complete, the unit
will reboot automatically.
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click
Start
, type “cmd” in the search field, and press
Enter
.
Windows XP Click Start > Run , type “cmd”, and press Enter .
Mac OS X Click
Go
>
Applications
>
Utilities
>
Terminal
.
Once in the Command Line Interface (CLI) type “
telnet
” followed by the
IP address of the unit (and the port number if it is non-standard) and then
hit “
Enter
”. This will connect us to the unit we wish to control.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note If the IP address is changed then the IP address required for Telnet access
will also change accordingly.
Note 2: The default IP address is 192.168.1.50
.