33
COMMAND
Description and Parameters
get out N1 hdcp status
Show the current HDCP status of the specified output.
N1
= A ~ B
[Output port]
Possible response values:
0
[No HDCP]
1
[HDCP 1.x active]
2
[HDCP 2.2 active]
3
[HDCP 1.x failed]
4
[HDCP 2.x2 failed]
get out N1 hdcp ability
Show the HDCP compliance level of the display device connected to
the specified output.
N1
= A ~ B
[Output port]
Possible response values:
0
[No HDCP]
1
[HDCP 1.x]
2
[HDCP 2.2]
3
[HDCP 1.x+2.2]
get in N1 hdcp ability
Show the HDCP compliance level of the source connected to the
specified input.
N1
= 1 ~ 2
[Input port]
Possible response values:
0
[No HDCP]
1
[HDCP 1.x]
2
[HDCP 2.2]
3
[HDCP 1.x+2.2]
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
Summary of Contents for PUV-2600RX
Page 2: ......
