27
COMMAND
Description and Parameters
get in N1 vactive
Show the detected vertical active pixel total for input N1’s signal.
N1
= 1 ~ 2
[Input port]
get in N1 refresh rate
Show the detected refresh rate for input N1’s signal.
N1
= 1 ~ 2
[Input port]
get in N1 interlace
Show if the source connected to input N1 is interlaced or not.
N1
= 1 ~ 2
[Input port]
Possible response values:
0 [Progressive]
1 [Interlaced]
get in N1 sync status
Show the detected sync state for input N1.
N1
= 1 ~ 2
[Input port]
Possible response values:
0
[No sync]
1
[Sync active]
get in N1 timing
Show the resolution and timing index value for input N1’s signal.
N1
= 1 ~ 2
[Input port]
get in N1 deep color
Show the detected colour bit depth for input N1’s signal.
N1
= 1 ~ 2
[Input port]
Summary of Contents for PUV-2600RX
Page 2: ......
