CYP PUV-1082-PRO, Operation Manual

Page: 51 / 100

51
Command Format
ZoneAvPair HDBT_Out {Port} Slot {Slot} {Parameter [= Value]}
Examples
ZoneAvPair HDBT_Out B Slot 5 VideoSrc = HDMI_In 2
ZoneAvPair HDMI_Out J Slot 3 Load
3) Multi-Port Command Format
Use the following syntax to set or change a single parameter for
multiple ports. Note that each additional port uses the “+” character
for separation. The number of ports allowed in a single command is
limited by the number of ports on that specific interface.
Command Format
<Command> {Port1}+{Port2}+{Etc.} {Parameter [= Value]}
Examples
ZoneLineOut A+B+C Treble = -12
HDBT_Out A+D+H Mute
4) Multi-Slot Command Format (ZoneAvPair)
The ZoneAvPair command allows for multiple slots on a single
HDBaseT or HDMI output to be assigned the same value
simultaneously. Use the following syntax to accomplish this. Note that
each additional slot uses the “+” character for separation. The number
of slots allowed in a single command is limited by the number of slots
on that specific interface.
Command Format
ZoneAvPair HDBT_Out {Port} Slot {Slot1}+{Slot2}+{Etc.} {Param [=
Value]}
Example
ZoneAvPair HDBT_Out B Slot 1+3+5 VideoSrc = HDMI_In 2