CYP PUV-1082-PRO, Operation Manual

Page: 49 / 100

49
6.8 RS-232 Control
Serial Port Settings
Baud Rate
115200
Data Bits
8
Parity Bit
None
Stop Bits
1
Flow Control None
6.9 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and press
Enter .
Windows XP Click Start > Run , type “cmd”, and press Enter .
Mac OS X Click
Go
>
Applications
>
Utilities
>
Terminal
.
Once in the Command Line Interface (CLI) type “
telnet
” followed by the
IP address of the unit (and the port number if it is non-standard) and then
hit “Enter”. This will connect us to the unit we wish to control.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note: The default IP address is 192.168.1.50. If the IP address is changed then
the IP address required for Telnet access will also change accordingly.
1
2
3
4
5
8
7
6
9
RI
DCD
RxD
TxD
DTR
GND
CTS
RTS
DSR